Products

Carbon Steel Rod Pointing Machine prepares carbon steel rods for cold drawing by reducing and forming the rod end for die entry and gripping. FR-10 to FR-100 models cover rod diameters from Ø2–100 mm, with different roller sizes, motor powers and configurations available.

The Copper Hydraulic Six Dies Pointing Machine is used to reduce the end of copper tubes before cold drawing. Its six hydraulic dies work at the same time and apply pressure from six directions, forming the tube end in one cycle. The six-die structure helps maintain better concentricity and a uniform pointed shape, making it easier to feed the tube into the drawing die. The machine is designed for continuous tube processing and can be used in copper tube drawing lines where consistent end forming is required.

The Carbon Steel Hydraulic Six Dies Pointing Machine is used to reduce the ends of carbon steel tubes before cold drawing. Six hydraulic dies work simultaneously and apply pressure from six directions to form the tube end in one cycle. The six-die structure helps maintain consistent end dimensions and concentricity, making it easier to feed the tube into the drawing die. The machine is suitable for continuous carbon steel tube processing and can be integrated into cold drawing production lines where consistent end forming is required.

FangRong Stainless Steel hydraulic four dies pointing machine is specially designed for reducing the diameter or tapering the ends of steel pipes, round steel and other metal rods/pipes. The machine uses four-cylinder synchronous hydraulic drive; the four dies close around the material simultaneously, shaping the ends of pipes or rods into a tapered or reduced form in one go. It's widely used in scaffolding pipes, railing posts, construction rods and steel pipe furniture for end pre-treatment processes. The ends processed by this machine are evenly tapered with smooth transitions, free of cracks or wrinkles, and the tips are well-centred, ready for subsequent insertion, welding, or driving into the ground.

The Carbon Steel Hydraulic Four Dies Pointing Machine reduces and forms the ends of carbon steel tubes, bars, and profiles before cold drawing. Four hydraulic dies work simultaneously from four directions to control eccentricity and deformation. FR-25 to FR-250 models cover different tube diameters and wall thicknesses, with customized configurations available for specific production requirements.

The FangRong Stainless Steel Hydraulic Three Dies Pointing Machine is used for flattening and end pointing stainless steel tubes before cold drawing. Two side dies move inward first to compress the tube, followed by the upper die pressing downward to form the required profile. This three-die hydraulic process helps control tube dimensions and reduce deformation and surface damage. It is suitable for stainless steel special-shaped tubes, furniture tubes, decorative pipes, and precision tubes.